plastic raw materials

plastic raw material(9)

Sameru Chemical Industries Sdn. Bhd

All Products >> plastic raw materials

Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]

eva
Specification: cable grade, film grade.....
Detail: Application: Refrigerator conduit, gas pipe, construction sheet metal, container and other commodities, packaging film, gaskets, medical equipment, hot adhesives, cable insulation layer. Item Test conditions Test method...

gpps
Specification: GPPS-123£¬GPPS-153D£¬GPPS-232£¬GPPS-251£¬GPPS-350.....
Detail: Item MFR g/10min Vicat softening point ¡ã C HDT ¡ã C Charpy I***ct strength KJ/m2 Tensile strength at yield *** Elongation at break % Flexural strength *** Flexural modulus *** DensityKg/m3 Standard ISO\1...

hips
Specification: Electrical grade
Detail: HIPS is a very high i***ct polystyrene used in the extrusion industry. This grade is designated to be diluted with crystal polystyrene(such as GPPS). The good melt strength of this grade makes it particularly suitable for deep...

pet
Specification: PET CR-8816 PET CR-8863 PET CR-8839 PET CR8828 PET CZ-5022
Detail: Parameter Unit Grade PET CR-8816 PET CR-8863 PET CR-8839 PET CR8828 PET CZ-5022 I.V. dL/g 0.810 ¡À 0.020 0.820 ¡À 0.020 0.770 ¡À 0.020 0.870 ¡À 0.020 0.64 ¡À 0.015 DEG % 1.40 ¡À 0.30 1.40 ¡À 0.30 1.20 ¡À 0.30 1.10 ¡À 0....

pp
Specification: pip grade, film grade.....
Detail: Performance Item Testing method Test data Data unit Melt Flow Rate ASTM D-11238 10 g/10min Density ASTM D-1505 0.91 g/cm 3 Flexuralmodulus ASTM D-790A 1250 *** Elongation at break ASTM D-638 300 % Tensile strength ASTM D-...

pvc resin
Specification: SG1, SG2, SG3, SG4, SG5.......
Detail: Usage: It is used in clothing bag, packing film, making flexible hoses and tubing, flooring, to roofing membranes, and electrical cable insulation. Specification: Index\Grade SG1 SG2 SG3 SG4 SG5 SG6 SG7 SG8 Viscosity ml/...

ldpe
Specification: film grade, blowing grade,Injection grade.....
Detail: Grade: Blow molding grade, injection molding grade, etc. Name LDPE ITEM Standard Fundamental Paramete Density 0.9205-0.9245 Physical Parameter MI 0.60-0.90 Turbidity ¡ãC ¡Ü9 Film Thinness ¦Ìm 50 Mechani...

lldpe
Specification: film grade, blowing grade,Injection grade.....
Detail: No. Item-name Unit Requirement Typical value 1 melt phase polycondensation g/10min ¡Ü2.0 1.3 2 density g/cm3 ¡Ü0.940 0.935 3 Tensile Strength *** ¡Ý14 20 4 Elongation at break % ¡Ý600 900 5 Low elongation at break % ¡ª 47...

hdpe
Specification: film grade, blowing grade,Injection grade.....
Detail: Property Test method Test Condition Unit DATA Melt Index ASTM D1238 190¡ãC 5.0kg g/10min 0.24 Melt Index ASTM D1238 190¡ãC 2.16kg g/10min 0.048 Density ASTM D1505 g/ 0.952 Tensile Strength(yield) ASTM D638 50mm/min kg/ 23...


Showing 1 - 9 of 9, total 1 pages [First] [Previous] [Next] [Last]
1

Sameru Chemical Industries Sdn. Bhd All Products >> plastic raw materials

Sameru Chemical Industries Sdn. Bhd

All Products >> plastic raw materials